Dry fall paint is a commercial painter’s top choice for its instantly dry attributes. This is also why it’s been named dry fall paint.
The paint was mainly developed for spraying paint on the ceiling and far-reaching walls. It has a special chemical mixture that makes it dry rapidly before even falling on the ground.
As it’s one of the newest development, many professionals and DIYers don’t know how to spray dry fall paint.
It’s a bit complicated compared to other painting methods, but nothing comes even close to spraying dry fall paint once you get the hang of it. And precisely, that’s why you’re listening about dry fall painting every now and then.
How to Spray Dry Fall Paint: 9 Easy Steps
Here we’ve broken down the entire dry fall painting process into a few useful steps. Read on; you would surely like it.
Choose Paint
The very first step to start with is choosing the paint. Choose the best-rated popular dry fall paint to your knowledge.
And color? Whatever pleases your eyes or as per your project’s requirement.
Choose Sprayer
A crucial factor for dry fall painting is its sprayer. You have to wisely choose a sprayer that has adequate power to paint even at a good distance with an extender.
The sprayer should have an extended hose which will enable better maneuverability. Along with these, try out a good PSI range sprayer for optimal paint injecting capability.
Clean the Surface
Remove the dust and derbies attached to the ceiling or wall with a blowing machine or peel them off with cleaner. Try your best to give the paint a fair playing ground without any obstacles.
Setup
Often the dry fall paint projects are on covering the industrial and commercial ceilings. There the height of the ceiling is way above a human’s reach. So, based on your project’s you have to take preparation and setup.
You can opt to get a good stable ladder or rent a scissor lift or articulated boom lift for projects of much height.
Undoubtedly these will give great ease to your work process.
For regular painting jobs other than the sprayer, nothing would be much needed.
Take Safety Precaution
As dry fall paint generates dry particles and dust, there are heavy chances it comes shooting at your eyes. Moreover, the dust and fume of the room are also very harmful to your lungs.
To save yourself from these hazardous elements, you need to get a proper breather and a shield to perfectly cover your face and mouth.
Cover Expensive Materials with Plastic or Polythene
Although the paint falls on the floor or different equipment it drys out, we recommend you cover expensive materials.
Furniture, electronic gadgets, mechanical equipment, and anything of your preference and care need to be coved down.
You can use polythene or plastic-made covers which are available on the market.
Properly cover the materials you need to keep out of dust’s reach and get started with the painting.
Start with a Small Trial
Whoa, wait up a bit, don’t jump off painting the whole place all at once. First, you test the PSI, pressure, and angle are properly set.
Take out a piece of long paper and spray the paint on it. Adjust the pressure to get the optimum coating.
Remember, while trialing, not too scattered, not too thick.
Time to Spray
After everything is lined up properly and all the equipment is checked twice, start spraying on the wall or ceiling.
Hold the sprayer perpendicular to the wall if you’re spraying the vertical wall. Move along with the paint to avoid thick layers. For the ceiling, the work process is almost the same. Try to shoot it from an even angle every time.
You’ve to be very careful as all the layers have to be even. Even spraying at all the parts should be the ultimate target.
Cleaning
It’s true; dry paint has cut down the strenuous painting work process. But at what expense?
The only bad thing about the spraying dry fall paint process is the dust and derbies it accumulates. Every other painting job does so as well. But if someone has a particular problem with dust, they mightn’t like it at all.
After painting, there will be dust all over the places, which you can clean easily by vacuuming or sweeping.
Frequently Asked Question(FAQ)
- Can you brush and roll dry fall paint?
No, dry fall paint is specially designed for spraying jobs only. As it dries out very quickly, it will stick to the brush and roller, making the situation even worse.
- How do you touch up dry fall paint?
Dry fall paint’s special feature makes it dry out within a fraction of a second after being released from the sprayer. Overspray falling from 10-15 feet to the ground usually becomes dry particles that you can sweep and vacuum clean easily.
- What is dry fall paint used for?
Dry fall paint is used mainly for ceilings and walls. To be more particular, it’s mostly used for commercial use to paint metal or concrete ceilings.
- Do you need to prime before Dryfall?
In usual cases, you don’t need to prime before dry fall painting. But in terms of woods and a few types of metal for better adhesiveness.
- Can you spray dry fall paint?
Yes, the dry fall paint is mainly used for spraying applications and making painting easier and less strenuous.
Conclusion
Dry fall paint is becoming rapidly popular, and more and more professionals are primarily choosing this over other painting options. Although it comes with a heavy setup anchor point, it offers great support to the painters in return.
You can jump on board the dry fall paint vessel by taking the steering wheel yourself.
The article on how to spray dry fall paint will surely have your back from the beginning of the process to the end.
So, what’s making you wait? Go, break a leg.